Precautions for safety production of aluminum alloy forging manufacturers
It is forbidden to remove the oxide skin on the cutting board surface directly with hands or feet. Do not stand opposite when blowing oxide skin with compressed air. Before the hammer stops, it is forbidden to stretch any part of the body under the hammer to take out the workpiece or tools. Replace the tire tool, mold or clamp. When the forging sticks to the forging die, cut off the power supply and add support before working. It is strictly prohibited to forge and burn billets and billets that are lower than the end forging temperature to avoid cracking and flying out to hurt people. Hot forgings or tools shall not be placed on the passage. The ring forgings shall be placed at the place and shall not be stacked too high. Before starting work, the forger must wear the specified labor protection articles according to the specified standards.
Before work, check whether the relevant electromechanical equipment, molds, tools, auxiliary facilities and hydraulic pipes are safe and reliable, and lubricate the equipment, otherwise, they shall not be used. Before working in the forging plant, the hammer head, hammer rod, die and tools shall be preheated. It is strictly prohibited to throw from a long distance. Protective baffles shall be added for close throw. Ring forging blanks shall not be thrown from the sidewalk. Large annular forgings must be clamped with pliers and transported by crane. Manual forging is carried out on the chopping block with manual forging tools, which has high labor intensity.